Order NO:YT-0201
When developing a process,it is important to know the exact time it takes for the coating to dry or cure.There are many stages to the coating drying time.Once a coating has been applied,the first stage is that the coating levels off under gravity.Once a coating begins to cure,a thin dry film appears on the surface .
Using an Biuged Drying Time Recorder,the operator can easily identify each of the stages of the drying process:
A ball tip is placed into the coating and,using the mathematical formula:Distance=Speed×Time;the Recorder begins to move this ball at a predefined speed.As the coating dries,the trace left in the coating by the ball identifies each stage of the cure.
The BGD 260 Circular Ball Type Drying Time Recorder is developed by ourselves according to the alike product principle of foreign countries. We select the high precision micro controller 's step motor. The motor drivers the pole 's sphere with 12g 's load in six kinds of diameter(ф0.5mm/ф1mm/ф2mm/ф3mm)and the line out a track we can get the lacquer and film 's dryness time covered with a dryness time table.
Main Technical Parameters:
■ Pole 's motor: 36BF02B step motor
■ Pole 's sphere: ф0.5mm/ф1mm/ф2mm/ф3mm
■ The velocity of the pole 's one circumference:24 h/r
■ Pole 's lad mass: 12g
■ Power 's voltage: AC220V 50Hz
■ Weight: 3.4Kg
■ Dimensions: 140×140×156mm (L×W×H)
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page